Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I connect to the Bioreactor Sampler to my bioreactor or fermentor?

April 26, 2017Bioreactor Connect fermentor sampler

0

Posted

How do I connect to the Bioreactor Sampler to my bioreactor or fermentor?

1 Answer

0

Posted

By several methods: (a) You can use the male Luer-Lok® connector (as supplied) to any female Luer-Lok® connector that is attached to your bioreactor’s sample line and connect using aseptic techniques. Note that the connection to your bioreactor must be done after autoclaving, if your bioreactor or fermentor is reusable. The Bioreactor Sampler cannot be autoclaved; (b) A tube welder can be used to connect the silicon tubing on your bioreactor by welding it to the C-Flex® tubing of the Bioreactor Sampler (20cm long, ID of 0.125 inches (3.2mm) and an OD of 0.25 inches (6.2mm), which is supplied as standard; or (c) We can make a custom version with any connector or tube dimensions that you supply or specify.