How do I connect to my Cisco Aironet Wireless Bridge using the console port?
A. Not all the Cisco Aironet Wireless Bridges come with a console port. The Cisco Aironet 1300 Series and the 350 Series Wireless Bridges come with a console port. In order to connect to the 350 Series Wireless Bridge using the console port, complete these steps: • Use a straight-through cable with 9-pin male to 9-pin female connectors to connect the COM1 or COM2 port on your computer to the RS-232 port on the wireless bridge. • Use a terminal-emulation program on your computer, for example, HyperTerminal, ProComm, or Minicom. • Set port settings to these values: • Speed: 9600 bits per second (bps) • Data bits: 8 • Stop bits: 1 • Parity: none • Flow Control: Xon/Xoff In order to connect to the 1300 Series Wireless Bridge using the console port, complete this step: Connect a nine-pin, female DB-9 to RJ-45 serial cable to the RJ-45 serial port on the power injector and to the COM port on your PC. For a 1400 Series Wireless Bridge which does not have a console port, if you need to configu
