Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I configure the Cisco 675 for PPP over ATM with Network Address Translation (NAT) enabled?

April 26, 2017address ATM Cisco configure enabled NAT Network PPP Translation

0

Posted

How do I configure the Cisco 675 for PPP over ATM with Network Address Translation (NAT) enabled?

1 Answer

0

Posted

A. Log in to the console port of the Cisco 675 in privileged mode (see How do I connect to the Cisco 675 through the management port?). Perform these steps: • Type set nvram erase to erase any saved configuration. • Type set nvram write. Press Enter. • Type set ppp wan0-0 login, where login is the username provided by your service provider. Press Enter. • Type set ppp wan0-0 password, where . password is the password provided by your service provider. Press Enter. • Type set ppp wan0-0 ipcp 0.0.0.0. Press Enter. • Type set ppp wan0-0 dns 0.0.0.0. Press Enter. • Type set ppp wan0-0 sdns 0.0.0.0. Press Enter. • Type set nat enable. Press Enter. • Type set dhcp server enable. Press Enter. • Type write. Press Enter. • Type reboot. Press Enter.