How do I configure my Seiko Instruments SLP printer for use with the Perle Trueport for Windows?
• Install and configure TruePort as described in the TruePort User’s Guide for Windows (http://www.perle.com/downloads/trueport.shtml) Select Enable Read/Write Delay and set the Additional Read Delay to 100 and Additional Write Delay to 50. You can tailor these values for your environment; if the printer is ‘jerky,’ decrease the Additional Write Delay, but if the labels are not printing correctly, you should increase the Additional Write Delay. • Configure the IOLAN Device Server. Add the TruePort host to the Host table and set and configure the Line Service to Silent Raw. • Once TruePort negotiates the TCP connection initiated by the IOLAN Device Server, it will start the New Hardware wizard to create the TruePort COM port. Windows will allocate the next available COM port number to this device. • You can now run the Seiko Instruments SLP printer software to add the printer to this new COM port. Note: The Seiko Instruments driver recognizes COM ports 1 through 9. If necessary, the loc
