How do I configure 64K colors for XSun/CDE?
Solaris’ kdmconfig offers only a choice of 256 or 16M colors for your graphics board with XSun. To configure XSun to use 16-bit color, configure using kdmconfig for the desired resolution in 256 color mode. Note the board line from file /etc/openwin/server/etc/OWconfig. Look in the referenced file in directory /usr/openwin/share/etc/devdata/SUNWaccel/boards to see if there is support for 16-bit color mode for your card. If your board is listed, edit file /etc/openwin/server/etc/OWconfig and change defdepth=”8″ to defdepth=”16″ in it. Also, values for MaxPClk for some cards are way too low in 16-bit and 24-bit modes in file /usr/openwin/share/etc/devdata/SUNWaccel/boards. But if you want to change this, you are doing it on your own risk. Some applications hang on 16-bit colors. The CDE logo that is displayed after one logs in is a bit-mapped grayscale image(!?), but everything else should work just fine.
… only the command prompt o Enable VGA mode Same as a normal startup, but Windows uses the basic VGA driver rather than any other video driver o Last Known Good Configuration (Windows NT-based) Starts the computer by using the configuration that was saved the last … client computer hardware. Verify hardware compatibility by using the qualifier tools · Verify that hardware is on the Hardware Compatibility List Configure driver signing options · Three …
