How do I check votlages of each of my lipo cells through the balance taps?
This is a simple process. If you have 4 wires it is as follows: Pin 1-2 = cell 1, Pin 2-3 = cell 2, Pin 3-4 = cell 3, if you have less or more wires the same procedure can be followed to figure the other cells voltages. It should be noted that pin 1 to the last pin on the connector would yield total pack voltage and should match the voltage from the main lead. We sell the mating connector on our website and you can create a charge adapter to charge individual cells if need be. You should be very careful when doing this. it is easy to short out a cell/cells. This activity is not covered under warranty.
