How do I change the time on the AVR Clock using the button switch?
To change the time, make sure that the Numeric Display does NOT show the current date. If so, change it using the menu. A long push will enter the Change mode. If the Numeric Display is Off, the time will also be changed, even if the Binary Clock Display is active. The clock is stopped when changing time. The value being changed will flash at this point. If the Numeric Display is Off, one of the Clock Hands will flash in an Analog Dial Display. In a Binary Clock Display, the “lights” columns representing the value being changed will flash. A short push will increment the current field (hours, minutes, seconds). A long push will move to the next field, using the current field value as the new time value. Once done with the seconds field, a “Push To Start” message pops up. A short push will restart the clock at the selected time. However a long push will restart the clock at the actual time, as kept by the on-board Real Time Clock. This is handy if you entered the Change mode by accident
