Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How do I change the printers internal EEPROM parameter settings?

April 26, 2017EEPROM Internal parameter printer settings

0

Posted

How do I change the printers internal EEPROM parameter settings?

1 Answer

0

Posted

Note: This method is common to all Practical Automation Printers. (There are, however, a few differences, noted below). • With paper in the printer, turn power on while continuously holding the F3 switch. • Wait for the first beep (this can take several seconds). • Release the F3 switch. • Wait for a second beep (this can take several seconds, occurring after the paper is registered). • Press the F3 switch, twice (approximately 1 second apart), holding the second press until the change mode is entered (a menu printout will occur). • Once in the change mode, follow the printed menu’s instructions to move the cursor and change the required parameters. When done cycle the power to resume normal printer operation. Please refer to the User’s Manual for more detailed information. on ETX Model Printers: The EEPROM function must be enabled. This requires DIP switch SW2 #8 to be set to the 1 / OFF position. on LTx Model Printers: This printer does not have a beeper. The flash of the ATTN/ERROR