how do i change the power window regulator in my 1998 pontiac transport?
I am working on this today. It is not easy but can be done. The window regulator sliders slide in a track attached to the bottom of the window glass. The sliders are kept from coming out by the simple expedient of “pinching” the end of the track a bit so the sliders can’t come out. I took the window regulator sliders out the front of the track. After removing all bolts holding the mechanism in place and all wiring connectors, pull it out from the door a bit and reach behind with a pair of channel locks or bent nose needle nose pliers to bend the bottom edge of the track back out so the sliders can slide out. I could not figure out how to get the little rods that work the door latches off so I ended up flexing the bottom mount of the door latch and lock latch mount down and popping the latches loose. Be suire to unhook the wiring harnesses including the ones on the door latch mechanism. This one is hard to get to but it can be done. Also make sure the speaker wire is disconnected. Have
