How do I change my coin settings to give 5 credits for $1 and 25 credits for $5?
(A) The settings are as follows: Coin menu – bonus setup: • E1 = COINS • E2 = BONUS CREDITS FOR LARGER INITIAL COIN INPUT • E3 = ONE DOLLAR • E4 = BONUS CREDITS FOR FIVE DOLLARS To set the menu to give 25 credits for $5.00: Coin inputs/coins = credits = meter pulses • E1 1 1 1 • E2 1 1 1 • E3 4 4 4 • E4 1 25 20 To set the menu to give 5 credits for $1.00: Coin input/coins = credits = meter pulses • E1 1 1 1 • E2 1 1 1 • E3 4 4 4 • E4 20 25 20 (Q) I’m having problems with my Merit Megatouch 5 PCB. I have the CRT-260 board and when I turn the machine on, all I get is clicking on the coin counter. The coin counter keeps clicking while the machine is on and the game does not boot up. Any ideas? (A) On the CRT-260, there is an IC chip at U41 called a UART. With the game turned off, remove the U41 chip and turn the game back on. If the game powers up with a touch control failure, then the UART chip at U41 is bad. If the problem has not changed, then U26, U19, U20, U49, U50, or U51 may be def
