How do I build a simple but effective lightbulb vaporizer?
Added by: snoofer Last edited by: snoofer Viewed: 249 times Rated by 117 users: 8.93/10 Contributed by: gizzmo Submitted: Images archived 2004 [Editor’s note: the lightbulb can break during construction – wear gloves! Glass straws are highly advised, as plastics can emit harmful vapors] There are a lot of really expensive vaporizers available, but there are cheaper ways This might not work as good as the $200 ones, but it does work well. Parts list: • Normal light bulb (100 watts if possible; the glass is more heat resistant than 40/60 watters. The bulb should be clear and not frosted) • Knife • Scissors • Tape • 2 straws or glass tubes (glass tubes are better since they can’t melt) • Cap of a 0.5 liter bottle (US: 16 fl. Ounce bottle cap) Construction: First if all, we start off with preparing the buld by cutting off the lower part like this: You might want to sand off those nasty metal edges since they are really sharp, like this: Now, in step 2, we need to get the wire and all that
