How do I attach things to my SeaSucker?
Attaching accessories to your SeaSucker is easy. You have 6 basic options: 1 – using a machine screw in the center insert; 2 back-plating through the slots in the housing; 3 – attaching accessories to an aluminum track; 4 – using one of our new Bridges; 5 – using the housing handle; or 6 – using a Tentacle. • Many accessories can be attached with a standard -20 machine screw, which screws into the stainless steel insert in the middle of your SeaSuckers housing. The screw you use should be approximately 1/4 to 3/16 longer than the depth of the hole in your accessory any longer and you risk running into the SeaSuckers integral pump. • Back-plating items to your SeaSucker provides a very strong connection. To back-plate, remove your SeaSuckers housing by unscrewing the four screws in the corners. Pull the housing off of the vacuum cup and pump, and attach your accessory using a nuts, bolts and washers through the two slots in the top of the housing. Look for our Back-Plating Instruction G
