How do I Apply Rust Bullet Automotive with an HVLP Spray System?
Rust Bullet Automotive applied through HVLP spray equipment using a 1.7 to 2.0 tip with 40- 60 psi will achieve a dft of approximately 1.5 – 2.0 mils per coat. It is important to run Xylene through the spray equipment prior to spraying the first coat of Rust Bullet Automotive to remove any moisture that may be trapped in the equipment. After the application of each coat of Rust Bullet Automotive, flush the gun or submerge the tip in Xylene. It is important to keep the equipment and sprayer clean. If the spray gun has a filter, it must also be cleaned. Toluene may be used if Xylene is not available. Application equipment must be cleaned immediately after use to avoid damage.
