How do I apply an adhesive WebDecal?
Adhesive WebDecals are made of individually die cut vinyl letters which are shipped to you on ‘transfer’ tape as one piece. You do not have to apply each letter separately. Please follow these directions carefully for best results. 1) Lay decal on flat surface, tape side down. Using the edge of the plastic squeegee that came with your decal, squeegee from the center out to the edges in all four directions to remove bubbles and wrinkles from the tape. 2) Clean the application surface thoroughly with a commercial window cleaner. 3) Starting at the top, right corner, slowly peel the blue backing off the letters and tape. (Letters will stick to tape.) 4) Once the liner backing is removed from the taped letters, spray a fine mist of water on the window. Do not over spray. 5) The water will allow you to “float” the decal into place on the window surface. Make sure it is straight and centered on window. You can use your defroster wires as a general guide. 6) Hold the decal in place with one h
