How do I adjust the tracking on the power discharge conveyor belt?
Our power discharge conveyor is designed to track consistently, but over the life of the sealer it may be necessary to adjust the belt. There is a tracking adjustment mechanism located at the discharge end of the conveyor. First loosen the 2 -20 bolts that lock in the adjustment bracket with a 7/16 wrench. Then, use a wrench to turn the adjustment bolt 1/8 turn at a time. Cycle the sealer watching for the correct belt alignment. The tracking mechanism requires very slight turns to achieve the desired results. There Is a jumper on the main PCB marked CONVEYOR SET-UP. Moving this jumper from the NORMAL or A position to the SETUP RUN or B position will make the conveyor belt run continuously and make tracking much easier. When tracking is satisfactory, return the jumper back to the NORMAL or A position. Consult your local SEAL-A-TRON service tech for more details.
