How difficult is it to operate a foam machine for a party?
If you have setup an inflatable bounce or slip and slide you should be able to operate a foam machine. Preparations include the following steps below and should take approximately 15 minutes: • Site Selection (20X20) area for 15X15 foam pit Access to water hose, electricity(extension cord, surge protector recommended), and 32 gl trash can Plugs for foam machine, foam machine water pump, and foam pit blower. Water hose and 32 gallon trash can Outdoors: On grass preferred • Fill 32 gl trash can with water and add 1 liter of foam solution. Place near foam machine setup. • Attach sump pump to foam machine via hose connection. • Insert Bubble Blaster foam party machine into foam pit and inflate pit. Surge protector should be placed at least 20 ft from setup and placed off the ground • Drop water pump into the 32 gallon trash can and turn on pump and foam machine • Once the required foam height( not to exceed chest high for your guests) is reached you may turn off the pump(unplug or pull pum
