How come Outcast uses different PVC for different boats?
The reason why AIRE uses different PVC for different boast is to keep the boat light and agile. The float tubes aren’t going to be carrying near the weight that pontoons will, therefore they don’t need as thick of fabric. The rafts are going to be riding lower in the water and are usually going to be carrying more weight. The rafts use the thickest fabric that AIRE carries. AIRE also puts a lighter fabric on the top part of the boat to save some weight. The top of the boat doesn’t have near the exposure to the rocks and other sharp items that the bottom of the boat does. How do I install the thwarts on my Outcast boat? 1. Thread the webbing end of the cam strap through the lower D-ring. Make sure that the tab on each cam strap faces away from the side tube or it may cause the strap to loosen. 2. Thread the webbing end through the cam buckle space (not the jaws) next to the sewn loop. 3. Thread the webbing end through the same D-ring and then pull the strap snug. (This is to hold the ca
