How can VIDURSOLAR glass-glass PV modules be installed?
The installation of VIDURSOLAR glass-glass PV modules is the same as that of a standard laminated glass with the same mounting standards and regulations applicable. Care must be taken in the handling as the breakage of a PV-glass is much more costly than for conventional glass. Installation by an experienced installer is always recommended. The electrical connection for BIPV modules is the main difference with that ofa normal glazing unit. In the case of the electrical junction box being placed on the rear face of the module the electrical connection is independent of the mounting of the glass. The electrician can undertake the connection of the modules after their installation. In the case of an electrical junction box on the edge of the module (edge connector or terminal) the cabling must be co-ordinated with the glass installer as the terminal and cables are carried inside glazing support profiles. The latter option is most important from the aesthetic perspective with no cabling vi
