How can one fix a slow broadband (cable or DSL) or Windows network connection?
The main factors that influence your service speed are: 1) Your network interface card (NIC) is older and slower hardware. 2)An incorrectly configured firewall 3)A shared connection with other users on a local network 4)The use of a wireless modem or router 5)You might have spyware/malware infecting your machine, and secretly using your Internet bandwidth.Here i mentioned some of the tips to increase your internet speed1)First reset your modem2)Delete all cookies and temporary files.3)Use different browser. Because normally some browser enabled javascriptand flash video ,so the webpages is loaded very slow.So you can try itdifferent browser.4)Virus,malwares is also another important thing it will make a slow connection.So use a good antivirus software to remove all virus and malwares .Finally go to this site Scanmyspeed.com then check your internet speedit will definitely works very fast.
Slow network connections are often caused by bad network cables (especially long ones) or cables that are not run correctly or are not plugged-in all the way. This is particularly true for custom straight-thru and crossover cables because they are often made improperly by inexperienced, untrained people, are not fabricated with the correct plugs and cable, and/or not properly tested before delivery. Other causes include defective network adapters and interrupt conflicts, and other equipment failures, such as hub, Ethernet switch, and router ports. With this said, another possibility, when using the TCP/IP protocol, is an improper Windows registry setting. The Windows registry should be backed-up before you start. To do that, go to Start, Run, enter regedit, Help, and look under Import and Export or in the Help Index under backing-up the registry files… The process is at http://cable-dsl.home.att.net/#IncreasingWindow. You may find the instructions at the link a little confusing. So h
How can one fix a slow broadband cable or DSL or Windows network connection Slow network connections are often caused by bad network cables (especially long ones) or cables that are not run correctly or are not plugged-in all the way. This is particularly true for custom straight-thru and crossover cables because they are often made improperly by inexperienced, untrained people, are not fabricated with the correct plugs and cable, and/or not properly tested before delivery. Another possibility, when using the TCP/IP protocol, is an improper Windows registry setting. The Windows registry should be backed-up before you start. To do that, go to Start, Run, enter regedit, Help, and look under Import and Export or in the Help Index under backing-up the registry files… The process is at http://cable-dsl.home.att.net/#IncreasingWindow. You may find the instructions at the link a little confusing. So here are mine… In the second column of the table, choose your version of Windows (e.g., Wi
