Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

How can I update a SmartNode 4552/4554 in redboot mode ?

April 26, 2017mode redboot smartnode

0

Posted

How can I update a SmartNode 4552/4554 in redboot mode ?

1 Answer

0

Posted

Hold down the reset button while you power cycle the unit and make sure you hold it down for at least 10 seconds. Connect a PC to the WAN port of the SN4554. You will have to set your PC statically to an IP address on the same subnet (172.16.40.2 255.255.0.0). The WAN interface IP address in reboot mode should be 172.16.40.1 255.255.0.0. You will then have to open a telnet session to the above IP address. Once there you should see the RedBoot> prompt. Follow these instructions to reset back to factory. 1. RedBoot> fis load 2.