How can I take a double exposure with the OM-{1-4T(i)}?
1) Take a blank exposure and advance the film. By “blank” I mean an exposure with the lens cap on. If you have an autoexposure camera, make sure to do this with the camera in manual mode, or you will be waiting a long time (and burning a lot of battery power) waiting for the exposure to complete :).
1) Take a blank exposure and advance the film. By “blank” I mean an exposure with the lens cap on. If you have an autoexposure camera, make sure to do this with the camera in manual mode, or you will be waiting a long time (and burning a lot of battery power) waiting for the exposure to complete :). 2) Operate the rewind knob to take up any slack. 3) Take the first exposure. 4) Operate the rewind release button and wind the camera while holding the rewind knob stationary. This cocks the shutter but does not advance the film. 5) Take the second exposure. 6) Advance the film and shoot a blank after the double exposure. Below are some alternate methods: The OM2 can do pin-registered multiexposures by: 1) tightening the rewind lever, 2) flipping the rewind knob to the rewind position, 3) rewinding slightly 4) flip the rewind knob back, 5) continue rewinding until it clicks and stops. 6) This advances a half-frame; repeat to rewind one full frame. On the OM4 you cannot get pin-registered mu
