How can I restore the camera image default settings for my Lumenera Network camera?
To restore the factory default image settings for the Lumenera camera, use any of the following methods: From a Web Browser: • In a web browser, type in the IP address of the camera into the address field. • From the camera’s web interface, go to the Camera Settings tab. • Select the Image Defaults hyperlink. This reverts all camera imaging settings to their default values. • To keep these settings after the camera has rebooted, click on the Save Settings hyperlink. From a Telnet Interface: • Open a telnet application and connect to the camera using its’ IP address. • Type the following command: luether put_settings_from_property default_image_params • Once this command is executed by the camera, all of the camera image settings will have returned to the factory default. • To keep these settings after the camera has rebooted, type the following command: luether save_settings You can also use the Factory Reset button in the camera as follows: • Turn off the camera by disconnecting the p
