How can I remove and clean the oil condensation box?
Date: Thu, 17 Sep 92 11:28:57 EDT From: mm@workgroup.com (Mike Mahler) To: mm@workgroup.com, on@nyquist.bellcore.com, swedishbricks@me.rochester.edu, alfred@nyquist.bellcore.com Subject: Re: Need help for a 740T engine >>Mike M. suggested to check the oil condensation box. Yes, I saw a black box under the intake manifold. What does it do and how can I unclog it. (I don’t recall such gismo on my 242GT.) The oil condensation box is held on with two bolts which are a bitch to get to. There is an outlet on top where the flame trap sits, or in your case just a clear hose. Once you remove the bolts, pull the box out of the car and fill it with gasoline or kerosene and shake it around alot. Do this about 3 or 4 times until you get all the oil out of it. Then dry it off and blow through the holes to make sure they are clear. The hose that going into the top, which leads to the flame trap nipple should be clear and UNKINKED. Sometimes they kink and block off the flow of pressurized gases from t
