How can I program the remote codes for a product Ive connected to the front-panel Video 4 inputs of my AVR 230 or AVR 330?
On the AVR 230 and AVR 330, you may assign (or reassign) a new device type to the Video 4 input selector on the main remote control. First, look up the product codes for your product in the tables at the back of the manual. Jot down any codes that apply. Next, program a code into the remote as follows. 1. Simultaneously press the VID4 and Mute buttons, and hold them until the red light under the VID4 button turns on. 2. Release the buttons, then press the input selector that corresponds to the type of product connected to the front-panel inputs, such as VID1 for a VCR or CD for a CD player. 3. Using the Numeric Keys, enter one of the product codes you found in the tables for your product type. 4. Press the VID4 button again. The red light under the VID4 button should flash three times to confirm that the selector has been programmed. 5. Test the remote on your product to make sure that most functions operate correctly. If only one or two functions work, you may need to program a new pr
Related Questions
- The video-signal colors are affected when connected via the component video inputs on my AVR 7000. Am I doing something wrong?
- How can I program the remote codes for a product Ive connected to the front-panel Video 4 inputs of my AVR 230 or AVR 330?
- What types of video inputs can be connected to the NCast Telepresenter M3?
