How can I print big files (especially from SAMBA, the WfWg network program)?
First step: Add “:mx#0:” to the printer’s entry in /etc/printcap. Once you have “mx#0” in your /etc/printcap entry, make sure you have enough disk space in the “/var” filesystem to handle the job. Also beware that “lpr -s” can fail obscurely if the file you are printing (and the path to it) are not accessible by the user daemon. 8.8 : Tape Drives. 8.8.1 : What are the jumper configurations for the Exabyte 8200 DAT tape drive? Jumpers/switches are on the MX board. I think that the top of the case and the board must be removed to access jumpers/switches. Per a November 1989 8200 Spec there are at least two different MX boards. Level 1, part no 724021-xxx has jumpers. Level 2, part no 724022-xxx has switches. Level 1 Jumper Configuration: J1 L-M Bypass Memory Test – 8 Second Startup M-R Run Memory Test – 65 Second Startup J2 L-M Parity Checking Enabled M-R Parity Checking Disabled J3 L-M Even Byte Disconnect M-R Odd or Even Byte Disconnect J4 L-M No Busy Enable M-R Report Busy Status J5 L
