How can I pair my ANT belt to my Suunto device?
NOTE! There should be no active HR Belts or pods within 15 meters when trying to pair a device! Computers, TV’s and other electronic devices can cause interference – please ensure that there are no such devices within 5 meters! In order to ensure a reliable signal the heart rate belt must be worn tightly and the electrode skin contacts must be moist. The ‘SUUNTO’ text must also be upright. 1. Remove the battery from your HR Belt, reinsert it upside down and then remove it again. 2. Enter the Training Mode menu on your t3/4/6 and Select ‘PAIR’ (t6) or ‘PAIR A POD’ (t3/4) then select ‘HR BELT’ – ‘TURN ON NEW DEVICE’ (t6) or TURN ON HR BELT (t3/4) is displayed. 3. When ‘TURN ON NEW DEVICE’ (t6) or ‘TURN ON HR BELT’ (t3/4) is displayed insert the battery into the HR Belt (with the ‘+’ facing outwards) – The display will briefly flash ‘Pairing Complete’ (t6) or ‘Paired’ (t3/4) if the pairing has been successful. 4. Exit the menu by pressing the middle right button for 3 seconds (t3/t4) or t
