How can i install a Pny 2Gb flash card in a Vivitar Vivicam 4090 ?
I’m not really sure what the problem is, so I’ll just run through a few troubleshooting tips. 1. Make sure that the memory card is compatible with the camera. The two key compatibility issues that you need to address are card type and capacity (for example; SD card up to 2GB in size). Through some quick research I have found that the Vivitar Vivicam 4090 uses SD cards up to 2GB. 2. Some SD cards have a built-in ‘lock’ to stop them working to prevent accidental data loss. You must make sure that this is in the unlocked position before trying to use the card. The lock is usually accessed by using a small lever on the edge of the card. 3. Make sure that the camera is turned OFF before, and during, inserting the SD card. 4. Make sure that the SD card is inserted in the correct orientation. There should be more information on how to insert the SD card in the manual, or a very small instruction printed next to the SD card slot. The way that you verify the orientation of an SD card is the sin
