How can I display the LifeBooks video output to an external monitor (CRT), or to both the internal screen and an external monitor?
Once your monitor’s cable is connected to your Fujitsu PC notebook’s external VGA SVGA port (at the rear of the system) and you have booted (started) Windows, hold down the FN key on your keyboard (located in the lower left corner of your keyboard) and press function key F10 key on your keyboard while keeping the FN key pressed down. Keep the FN key pressed down and press the F10 key again. Try “toggling” the video output destinations by pressing these two keys simultaneously. Pressing these keys will toggle the video output destination between the LCD mode, the CRT mode and the Simultaneous display mode (if the external monitor is compatible with the installed video driver). To leave your video output to a setting other than to the Fujitsu PC LifeBook’s LCD, check your Fujitsu PC owners manual. Simultaneous internal/external display is only supported in the LCD panel’s default resolution. The external display device (monitor, LCD projector/panel) must be capable of displaying the same
Related Questions
- I want to use the display as an output preview for editing NTSC video. Should I purchase a display monitor that has a color gamut with as close to 100% coverage of NTSC (1953) as possible?
- How can I display the LifeBooks video output to an external monitor (CRT), or to both the internal screen and an external monitor?
- When I use an external monitor and disable the internal display, the PNAs LCD goes white. How do I get the screen to go black?
