How can I change Banks (Pr1, Pr2, Int, Cst) on my VL70-m from my WX5?
The VL70-m responds to MIDI Bank Select messages and the WX5 can send such messages. On the WX5, hold the low C key, hold the Patch Change button, press the following number keys (in order down from the B key = 1 through the E key = 0). The Banks in the VL70-m are numbered as follows: Bank Select 000 = Pr1 Bank Select 001 = Pr2 Bank Select 002 = Cst Bank Select 003 = Int Release the keys and now the next program change you send from the WX5 will select the new program AS WELL AS the new bank. Note that the bank change won’t take effect until you do a program change. Additional instructions and illustrations are available in the WX5 User Manual on pages 16-17. Or, here is another way to explain it: To switch to Pr1 (Bank 000), hold down the program change button (the one on the back of the WX5 that is furthest from the mouthpiece) and the low C key (again, the one that is furthest from the mouthpiece) at the same time, and while holding those two keys down, press the E key (the one on w
