How are the front grills removed from the ceiling and wall speakers?
In-wall and in-ceiling speaker grills are pressure fit and rely on contact of both inside and outside surfaces to hold it in place. If the grill becomes warped/distorted, it will be more difficult to remove or reinstall. Proper care should be taken when removing or reinstalling it. If the speaker is not yet installed: While looking at the rear of the speaker assembly, rotate all mounting legs outward into their free position and then push them forward, one by one, towards the front of the speaker assembly. This will push the attached screws forward to meet the inside of the grill and push it out from behind. When a section of the grill starts to move out, apply pressure to one of the other mounting legs until the grill is free. If the speaker is installed: We suggest the use of a small hook tool (resembling a dentist’s pick) or other small, pointed tool. A bent paper clip or stiff wire will work as well. Hook the device into a hole in the metal mesh of the grill near a corner (In-Wall)
