Explain the hook up for the Apollo Brake?
It is recommended to push on the brakes in the toad vehicle 3-4 times before putting the Apollo in. If you do not do this and the brakes activate with the Apollo the vaccum in the reservoir will also apply and can lock up the brakes. Place the Apollo on the floor of the toad vehicle. Attach the clevis to the brake pedal. Move the Apollo forward until the cylinder rod is fully retracted. Then adjust the driver seat so that it touches the back of the Apollo. Adjust the Apollo back brace to sit secure against the seat. Plug the Apollo into the cigarette lighter. the air compressor will fill the tank in 30-40 seconds. Puch the test button 4-5 times to make sure things are working properly. Make any final adjustments to the seat. The testing may have changed the position of the Apollo. Check the brake lights on the towed vehicle, if they are on, the Apollo is too close to the brake pedal.
