Does the pre-fab “modem cable” you guys sell work with multiple radios?
Yes, the pre-made cable we sell works with Yaesu FT-817, FT-857, FT-897; Icom IC-706, IC-706, IC-7000; and the Kenwood TS-480 transceivers. We are considering making cables for use with other popular transceivers as well. The Select pushbutton is too close to the edge of the hole in the top half of the case, and sometimes it binds. You can adjust the position of the pc board within the enclosure, and hence the distance of the Select pushbutton to the hole in the case. First, remove the top half of the enclosure and loosen the nickel-plated screws on the bottom of the enclosure. While pushing the pcb toward the lower left direction, re-tighten those screws on the bottom shell. Next, loosen the screws holding the pcb to the standoffs on the top of the pc board. While pushing the pc board to the lower left, re-tighten those screws on the pc board. Put the top half of the enclosure on again and attach the four black anodized screws, while simultaneously biasing the top shell as far to the
