Does the Laser Shifter ZR3 work with other radar detectors?
The Shifter ZR3 may be used along with any radar detector. However, the only detectors with the ability to directly “link” to the Laser Shifter ZR3 are the Escort Passport 8500 X50 and Escort Passport SR7 radar detectors. SRX The following instructions are to be used when adding the Laser Shifter ZR3 to the Passport SR7 remote radar and laser detector. In this configuration, the Passport SR7 will have Laser Shifting capabilities. Open the Passport SR7 package and remove the front and rear laser sensors. These are not used in this configuration. Open the Laser Shifter ZR3 package and remove the two (2) front Laser Shifters, and the rear Laser Shifter. All of these will be used in the installation. Using the Passport SR7 instructions (section B), plug the two (2) front Laser Shifters into the Y-Connector (marked “Optional ZR3 Connector”) supplied with the SR7. Plug this Y-connector into the SR7 interface marked “Front Laser.”Use the rear Laser Shifter for section “G” per the SR7 instruct
