Does Single Versus Stepped Curing of Composite Resins Affect Their Shear Bond Strength?
Richard Caldwell, BSc, DDS, FRCD(C) Gajanan Kulkarni, BDS, PhD, FRCD(C) Keith Titley, BDS, MScD, FRCD(C) Abstract Background: Shrinkage occurs during polymerization of all resin composites, affecting not only the physical properties of the composites but also the marginal integrity of the restoration. Stepped photo-polymerization, in contrast to single-cure photo-polymerization, is said to minimize this shrinkage. The thickness of the increments of resin composite being cured may also be a factor in final shear bond strength. This study compared the shear bond strength resulting from these two curing methods with resin composites of various thicknesses. Methods: Resin composite in increments of 1.5, 3 and 4.5 mm thickness, cured by stepped or single-cure photo-polymerization, was bonded to human third molar dentin with either the Scotchbond Multipurpose adhesive system or the Singlebond adhesive system. Each experimental group consisted of 12 specimens. After 7 days of storage in water
