Does PAVE have any rigorous life cycle testing on its epoxy molded wire seals?
PAVE-Seals just have passed very rigorous automotive life cycle tests in diesel fuel and oil of 20 million cyclic pressure and temperature tests between -40 to 170C between 0- 1000 psi (and to 2500 psi) with no failures whatsoever! From this testing and results, a service life of 600 million pressure cycles or 20,000 service hours @500 cpm is projected. These special tooled seals also comply to UL94V-O flame rating specification with a much higher relative thermal index (RTI) value of 130C compared to 90C for our standard seals. In addition, PAVE can add an optional tight tolerance machined metal sleeve to our low cost molded epoxy o-ring seal housing designs that would comply to the maximum flame path gap clearance required for UL or ATEX explosion proof seals. Please fax order and credit card info (NO emails with credit card info!) to +1 937 890 5165 or call +1 937 890 1100 x10 with card #, expiration date and CVD code on back of card. The shipping address must match credit card addr
PAVE-Seals have passed very rigorous automotive life cycle tests in diesel fuel and oil of 20 million cyclic pressure and temperature tests between -40 to 170C between 0- 1000 psi (and to 2500 psi) with no failures whatsoever! From this testing and results, a service life of 600 million pressure cycles or 20,000 service hours @500 cpm is projected. These special tooled seals also comply to UL94V-O flame rating specification with a much higher relative thermal index (RTI) value of 130C compared to 90C for our standard seals. In addition, PAVE can add an optional tight tolerance machined metal sleeve to our low cost molded epoxy o-ring seal housing designs that would comply to the maximum flame path gap clearance required for UL or ATEX explosion proof seals.
