Does humidity have an effect on the Icing Sheets?
Yes. For areas which experience high humidity extra precautions have to be taken. The Icing sheets after printing don’t dry up as expected. A room heater or a hair dryer can hasten the process of drying. Blow the heater for 60 seconds under hot position. The sheets should normally release from backing sheet after this exercise. Repeat the same if you still face peeling problem till the backing sheets peels off easily. Another solution would be to place the edible image in the microwave in defrost mode for 15-20 seconds, repeat the same if you still face the problem repeat …In some high humid areas the time interval has be increased up to a minute. However this varies differently depending on the climate of the area.
