Does FreeBSD support Zip drives?
FreeBSD supports the SCSI ZIP drive out of the box, of course. The ZIP drive can only be set to run at SCSI target IDs 5 or 6, but if your SCSI host adapter’s BIOS supports it you can even boot from it. It is not clear which host adapters support booting from targets other than 0 or 1, so you will have to consult your adapter’s documentation if you would like to use this feature. ATAPI (IDE) Zip drives are supported in FreeBSD 2.2.6 and later releases. FreeBSD has contained support for Parallel Port Zip Drives since version 3.0. If you are using a sufficiently up to date version, then you should check that your kernel contains the scbus0, da0, ppbus0, and vp0 drivers (the GENERIC kernel contains everything except vp0). With all these drivers present, the Parallel Port drive should be available as /dev/da0s4. Disks can be mounted using mount /dev/da0s4 /mnt OR (for dos disks) mount_msdos /dev/da0s4 /mnt as appropriate. Also check out this note on removable drives, and this note on “for
