Do these product series offer a tri-state logic control output function?
These product series offers a tri-state output function to facilitate the customer’s use of in-process assembly testing or for the use of multiple clocks.. For these series, pad one (1) is the tri-state input control pad. The output and complementary output are three-stated (tri-state condition) when the voltage at the control pad is set to a logic low state. In this condition, the oscillator output and complementary output are in a high impedance state. If the voltage at the control pad is set to no connect or a logic high state, the output and complementary output are enabled (clocking). Note: The oscillator has an internal pull up resistor on the control pad.
