Do the DD-D12 and DD-D15 DVI Distribution Amplifiers work with both computers and AV equipment?
Yes. If it was computer driving the displays, the DDC setting in the front of DD-D15 need to be set up. Please note that the resolution setting of the computer should be set at lower setting of the two displays. For example, if you have 1080i plasma and 1080p projector, you need to set up the computer resolution at lower setting which would be 1080i. Once display setting is done, at least one display should be configured to be the default display for the computer. To do this, you would TURN ON the pair of DDC dip switches for the display output port. For example, if you want to make the plasma in output port 1 to be the default, the pair of DDC dip switches must be TURNED ON. ALL OTHER DDC dip switches must be turned off. If no DDC is turned on, the computer video card will not detect DDC from the display and thus fail to work. If more than one DDC is turned on, the computer video card will see conflicting display information and video will fail to display correctly. For AV sources suc
