Do I have to use a SmartCraft Monitor with my OptiMax engine?
No, however the operator will be at a disadvantage without a display, the only warning information available will be the horn, and the operator may not be able to identify what caused the warning system to activate. An overview of the warning system follows: The SmartCraft warning system incorporates the display screen, the warning horn and the Guardian Protection system. The warning horn is located inside the remote control or is part of the ignition key switch wiring harness. Alarms Warnings – When a problem is detected, the warning horn sounds and the name of the offending alarm appears on the display. • If problem can cause immediate engine damage – the horn will sound continuously and the Engine Guardian System will respond to the problem by limiting engine power. Immediately reduce throttle speed to idle and refer to the warning messages on the monitor and descriptions in the Operation, Maintenance and Warranty Manual to tell you what to do about it. • If problem will not cause i
