Could you explain me how to setup my computer that is running TVideoGrabber and watch the live video stream by using another computer over the network ?
This example explains how to stream a webcam to the network. Let’s call the computer that sends the video stream the “master”, and the computer that watches the live video over the network the “client”. First of all, on the “master” side you need a free IP port of your choise (let’s say for this example 8805), and to be sure that this port is opened on the firewall settings of the XP control panel, and on the firewall of your router or DSL modem, if any. See the (*) comment below. 1) Make a quick test by running MainDemo.exe included in the package. Proceed as follows: a) on the “master” computer: – run MainDemo.Exe – go to the “network streaming” tab – in the “network streaming” groupbox, click on “direct network streaming” – in the “direct ASF network streaming:” groupbox, enter 8805 in the “Port” edit field” – go to the “video source” tab, and click “Start preview” – in the memo field on the left, write down the “streaming url:” that appears, e.g. mms://64.21.142.209:8805. See the (
