CHARGING The Lithium Battery – What is the procedure for charging my lithium battery?
1) Turn off battery switch (no red color showing) during charging and non-use to avoid battery pack electronics slowly draining battery. 2) Plug charger into wall socket. Charger light should blink red 3 times, then turn green. 3) Open battery bag, plug charger into small round socket next to yellow ‘check’ button. Charger light should turn red. 4) 100% full charge is indicated when the charger light has again turned green while it remains plugged into the battery. Remove the DC plug from the battery before removing the AC plug from the wall socket. The 4 LEDs on the battery are charge level indicators for riding and have no meaning during charging. Top off the battery whenever possible, and then unplug. These batteries have no memory issues. Tips & Tricks for Lithium Battery Maintentance: Your battery will NOT be damaged if you ignore the following procedures. Clean Republic lithium batteries contain internal over charge protection, over discharge protection, and over current protecti
Related Questions
- Why is that after several hours or even days of charging the Lithium Battery inside using the panel, the LED indicator is still in color red?
- Why it is too long to charge the lithium battery of the solar charger using the panel compares using the USB cable?
- What are the shipping guidelines I should be aware of with the 9V Lithium battery?
