Changes in the Modem Setup screen won save?
After finishing the changes in the Modem Setup click on “Exit”. Then select “Exit” from the Modem program and confirm the exit with three “Yes” answers. Now start the Modem program again and the changes should have been saved. Go to Setup and verify. The 2.13 version has an “Exit ∓ Save” button which saves the changes. Back to questions The modem does not dial and gives a “NO DIALTONE” message Check for the cable connections from your modem to the phone outlet. The cable should be in the LINE jack in the modem’s end. Try using a normal telephone in the wall outlet to verify that you can hear a dial tone. PLEASE NOTE: If you are dialing from within a private branch exchange (PBX), you must check for two things. Be sure you have “0,” (zero comma) in front of the modem number which to dial. Also add “X3” to the end of the initialization string in the Modem Setup. Back to questions The modem calls, but there is no answer “NO CARRIER” First of all, double check the modem number. Then che
Related Questions
- Using a PNG fie for my Start screen icon requires that I write a native C++ setup DLL. I am a managed code programmer, is there any way to meet these requirements using managed code?
- When I change Settings in the Experiment Setup screen, these changes don’t happen on the instrument. What’s happening?
- How do I setup my 3rd Party mail client for example Outlook to work with Shark Modem?
