Can you recommend a power supply for use with the Tomco amplifer module, BTM00250-AlphaSA?
For pulsed operation we would recommend the S-240-48 from Meanwell. For CW operation the rail must be reduced to 28V or less. If this functionality is required, two S-240-24 supplies can be used in series to give the otpino of 24V and 48V voltage points. Alternatively, any benchtop varibale supply can be used provided it can be set to the required voltage and can deliver the required current. Required current depends on the maximum duty cycle required in pulsed mode. Worst case is full power at 20% which would require just over 3A at 48V. Npote that external cpacitors are almost alwa6ys required as pre the amplifier module application note.
