Can you describe the fitting the halyard strops, shrouds and forestay loops on the Pahi 63?
The forestays together with the halyard strops go into position first. It isn’t really important, but check you don’t get chafe by placing them wrongly. The halyard strops are best if trapped under the shrouds. We have spare halyards on the aft mast at the top, on a rope strop and one at the shroud position. This one gets often used to hoist the outboard engines out of their boxes. We attach our 6-part purchase block on the end of the halyard and then position the halyard over the hole with some spare line to the shrouds. This works very well and you can either hoist the engine up on deck or lower in into a dinghy positioned underneath the deck. For hoisting people to the top of the mast we always use the peak lanyard. Remember to fit some flag halyards. Attach the block with a lashing to a shroud loop.
