Can veneers be fabricated with IPS e.max ZirPress?
IPS e.max ZirPress has been developed for pressing onto zirconium oxide and the shades of the material have been adjusted for this purpose. However, from a technical point of view, veneers can be fabricated with this material. For example, if veneers are required in the anterior region for a large restorative case and if the shade of the IPS e.max ZirPress ingot corresponds to the demands of the patient, veneers can be pressed (in the same investment ring). The cut-back technique allows the veneers to be individually characterized with IPS e.max Ceram. Veneers made with IPS e.max ZirPress must be placed with the adhesive technique. ( top of page) Can IPS e.max ZirPress be pressed onto inlay-retained bridges? IPS e.max ZirPress LT ingots can be pressed onto zirconium oxide inlay-retained bridges. In the creation of the zirconium oxide framework, the minimum thickness of the connectors and the inlays (min 0.5 mm) must be observed. All the areas at the preparation margins should be fabric
