Can the track and hardware be concealed?
There are several ways to conceal track and mounting hardware if so intended. Method 1: Use conventional drapery “S” pin with pleated curtain. One end of the pin goes into the ring of the roller, the other end of the “S” is to pin through the pleat. Position this pin about 1-3/4″ below the curtain top so that curtain barely touches the ceiling, the track is therefore covered by the curtain. Method 2: Use hem and trim tape to create the facing then use the above mentioned drapery pin. This will give you a seamless drapery. Method 3: Use our flexible hook . Use back side of curtain fabric to wrap around the paper thin portion of the flexible hook, then either stable or sew the piece in position about 1/2″ to 1″ below top of curtain. The hook can let your curtain height be adjusted to 1-1/2″. Click “flexible hook” on accessary page for detail. Method 4: Use our optional roller which has button on the side, named BR-2. Click “assembly photo” for different applications. You´ll need to make
