Can the tab on INPULL NUT be made small?
A8) The tab of INPULL NUT is larger than that of TURNUT. But as the steps of inserting the nut in a hole by the tab and then pulling it has to be taken, we decided to adopt this design to make it easy to handle the tab at the expense of its small size. INPULL NUT was also developed with an eye to using it at places where high holding power is what is most needed. Generally speaking, if objects are fixed on thin plates with screws and bolts of M6 or M8 forcefully, base materials are pressed out shape as they are pulled. Therefore, most users cover the base materials with something like metal fixtures of large surface in order to avoid deformity due to pulling force at the time of tightening. The size of the tab on INPULL NUT is decided so that it is not as big as it cannot be hidden behind the cover such as metal fixtures of large surface. If the tab sticks out of the fixture to be fastened, please find a position in which the bent tab is hidden under the cover such as metal fixtures by
Related Questions
- INPULL NUT requires a hole larger in diameter than the screw to be used. Is there any prpblem concerning the alignment of the screw after the screw is tightened?
- The tab of INPULL NUT is left between the base material and fixtuer. Is space created between them?
- How do I change the small graphic on the "Details" tab of my solution overview page?
