Important Notice: Our web hosting provider recently started charging us for additional visits, which was unexpected. In response, we're seeking donations. Depending on the situation, we may explore different monetization options for our Community and Expert Contributors. It's crucial to provide more returns for their expertise and offer more Expert Validated Answers or AI Validated Answers. Learn more about our hosting issue here.

Can the Frequency Coordination Council refuse to provide a frequency when asked to do so, especially when all the good frequencies seem to be taken ?

0
Posted

Can the Frequency Coordination Council refuse to provide a frequency when asked to do so, especially when all the good frequencies seem to be taken ?

0

A – The purpose of the ‘Frequency Coordination Council’ is to recommend frequencies when requested to do so. When there are many repeaters or other systems in an area on the band you want to use and there are no ‘clear’ frequencies available, you may be asked to share a frequency with one or more existing systems. When this is the case, you can use one or more techniques such as CTCSS sub-audible tones on your input and/or output frequencies to reduce interaction with other systems sharing the frequency. Another alternative you might be asked to consider is the use of a different amateur band. In many areas the 144 and 440 MHz bands are congested. In these areas, you should consider using the 50 or 220 MHz bands, or the higher bands, for your system. The availability of cheap 2 meter or 440 MHz radios is not considered a good reason for adding to the pileup on the ‘popular bands’, especially when other bands are relatively underutilized. There many benefits to the other bands such as l

0

? A – The purpose of the ‘Frequency Coordination Council’ is to recommend frequencies when requested to do so. As there are many repeaters or other systems in this area, there are no ‘clear’ frequencies available, you will be asked to share a frequency with one or more existing systems. You will be asked to use one or more techniques such as CTCSS sub-audible tones on your input and output frequencies to reduce interaction with other systems sharing the frequency. Another alternative you might be asked to consider is the use of a different amateur band. In many areas the 144 and 440 MHz bands are congested. In these areas, you should consider using the 50 or 220 MHz bands, or the higher bands, for your system. The availability of cheap 2 meter or 440 MHz radios is not considered a good reason for adding to the pileup on the ‘popular bands’, especially when other bands are relatively underutilized. There many benefits to the other bands such as lack of ‘intermod’ interference and a lowe

Related Questions

What is your question?

*Sadly, we had to bring back ads too. Hopefully more targeted.

Experts123