Can RadioRA 2 be installed in my existing home?
Yes, RadioRA 2 is designed to retrofit into any existing home. RadioRA 2 uses radio signals, so that no extra wires are needed for the system to work. RadioRA 2 dimmers and switches are direct replacements for existing switches and dimmers. Q3: How big of a house can RadioRA 2 cover? Lutron modeled a “worst case” home, including construction techniques such as cement, metal studs, stone walls and foil wrap. It was determined that in this worst case world, a conservative range for the RadioRA 2 RF signal repeater is 30 feet. Assuming the average height of a room is ten feet, a repeater could cover six floors (three floors above the repeater and three floors below it) or a 60 foot diameter sphere (30 foot radius). The coverage area of a repeater is approximately 2,800 square feet per floor. Using 4 RadioRA 2 repeaters, you could cover a floor as large as 10,000 square feet. Q4: What components make up a RadioRA 2 system? A RadioRA 2 system is made up of local lighting controls (dimmers,
